1940' Bra Sew-Along - Finishing with a closure.

Hello my dears. I hope you're having a lovely weekend so far.
I just want to start this post out today with a warm hug for my friends and followers in France. Your country was my first love and my oldest friend, and after the events of yesterday, you are in my thoughts and prayers.

It's a chilly day here in Monterey and the sun is at a low angle in the sky. My house smells like a house should on a cold day - hints of apple cider and a pot roast in the oven are wafting up the stairs to my studio. And it's the perfect time to type up a blog post and finish our sew-along.

In our last post we discussed edge finishing and sewing our straps in. Now all that's left to do is add our back closure and we should be done! I know we're all used to hook and eye closures in bras these days and that's what I prefer for this bra. But if you're going for a full 1940's bra style, know that you can also use buttons and loops if you like, or a French bra back, which is essentially two lengths of elastic and a hook.

For this project I have used plush-backed hook and eye tape with a double set of eyes for adjusting fit. This is pretty much plug and play, but there are a few notes on placement.

The first thing to do no matter what type of closure you use, is to stay-stitch the center back of each piece D to keep it from stretching while you work. This can be done with any straight stitch 1/8" from the edge.

1940's Bra Sew-Along - Sewing the real thing.

Hi there lovely readers. I hope I'm posting at an o.k. rate for you. It's been a strange week and I've been unfortunate enough to have a headache for 5 days now. I went to the doctor today just to be on the safe side and everything is fine - I'm just one unlucky girl this week...
For today's post we're going to sew our actual bra together now! In our last post, we went over lining and facing options. Now that we've squared that away, and you've faced your pattern pieces (if you so chose) we'll put together our bra in the exact same order we put together the test muslin.

This time though, as we sew each individual seam, we're going to stop and press the seam allowance a certain way, then top stitch it in place. This will give us that lovely 1940's look, as well as securing our raw edges.

So we start by sewing pieces A and B together along that tricky curved seam, and then press the stitches as sewn without opening them up. This will set the stitches. Then open pieces A and B, and press the seam allowance UP onto piece A.
Now you're ready to very neatly top-stitch 1/8" from the seam on piece A, as done below.

Now stitch both center front pieces together and press that seam open.

Top stitch again 1/8" from the center front seam on EACH side.

Then sew piece C to the lower edge of pieces B, press the seam allowance DOWN, and top-stitch 1/8" from the edge on piece C.

Now you're ready to attach the back of the bra, pieces D, to the side seams.

Once you have, press the seam allowances outwards to piece D, and top-stitch again.

And voila! You have the lion's share of the sewing done! Next, we'll talk finishing edges and adding straps.

Happy sewing,

1940's Bra Sew-Along - How to face pattern pieces and lining options.

Happy weekend, sewers! Ready to do some more bra sewing?

In our last post we talked about adjusting our cups sizes. Since I haven't gotten any more fitting questions from you, we're ready to move on.
Today we need to talk about lining options. What should the inside of our bra look like? Well, there are three methods of lining I have used in bra sewing in the past and one is far superior to the others.
The first is fully lining the bra. As I did with my bra #2001 for the Oooh la la Pin Up Sew-Along, you sew two complete bras (minus straps and closures), one of lining and one of outer fabric. Then you sew those two pieces right sides together all along the bottom seam and then bind the top edge. You can also sew the entire bra together at top, bottom and edges, leaving a gap to and turn the bra right side out. This conceals all of your raw seam edges. This can lead to some of your seams shifting a bit and if you have thin fabric, seam edge shadows can show up all over the place.

From a 1940's Brassiere in Profile - the edges here have been turned under and stitched, or faced with a piece of cotton tape.

Another technique is to sew one bra without lining, but of at least medium-weight fabric, and simply bind or turn the raw edges under as done in the bra above. By far though, I prefer to face my pattern pieces and use top stitching and rayon or cotton tape to finish my edges. This is the closest I can get to a historically accurate bra from the 1940's without hunting down some cotton-backed satin (seriously, it's hard to find!).

So to do this, simply cut the entire bra out from your outer fabric (I'm using white satin from our kit), and another entire bra from your lining fabric - I like fine cotton lawn or muslin for this.

Pieces C in satin and cotton, ready to be pinned.

Lay the lining pieces wrong sides together onto your outer (satin) pieces and pin them securely in place. You'll want your right sides to the exterior for this step.

All pattern pieces in cotton and satin, pinned wrong sides together.

Carefully baste each set of pieces together only along the top and bottom edges about 1/8" from the edge.

You will want to leave the left and right edges (side seam, center front and center back edges on all pieces) un-basted. If they are basted at all edges, this can lead to some creases and bunching that won't sit well on the sewn bra.

--Update: This method is a good one to use if your fabrics aren't prone to fraying. The satin I'm using doesn't fray very much so I'm comfortable with having a trimmed, top-stitched, but unconcealed raw edge inside my bra. If you want a more finished appearance on the inside, then you can either fully line the bra as mentioned above (instead of just facing your pieces) or you can finish the raw edges of each seam with either a serger or an edge stitch (a blanket stitch was very common on curved bra seams in the 1940's).

Here is the interior of my bra using the facing/ top-stitching method.

And now you're ready to sew your actual bra together!
Any questions about lining, facing or binding?

Happy sewing,

1940's Bra Sew-Along - Sewing Your Muslin

A few of you have already commented on our last post to say that you've gotten your pattern and materials so now is a good time to get started in time for some weekend sewing. Shall we discuss sewing our muslin? This is probably the most important part of bra sewing. Making sure that you have the best fit possible will make all of the work you'll put in worth your while. Every body is different, and breasts themselves have wonderful variations that can make bra sewing a bit of a challenge.
This is why we need a  couple of good test versions to perfect any issues before you cut into your good fabric.

To get started, print your pattern out to 100% scale on your home printer. Tape the pieces together and then choose your desired size.
The pattern comes with several sizes included from a 34"- 44" Bust. For this measurement, we're talking about the circumference of the chest, level with the tip of your bust.

1940's Bra Sew-Along, and a Sewing Pattern Giveaway!

Update: This giveaway is now closed.

Well, my dear readers, it's that time again. I have the lingerie sewing bug. It's been ages since our last sew-along and I'm happy to say that my schedule has cleared just enough to allow me to host another one!
And the pattern I would love to make with you is my absolute favorite bra pattern, Depew #2013.

1940's style bra pattern Depew #2013 32"- 44" Bust.

I just most recently made this bra up in white satin and it turned out so beautifully, I thought, "Every girl should have one of these!" I wore this bra ll day yesterday under a semi-sheer top and it was so comfortable! I even had a lady approach me at a shop and say, "This is going to sound weird, but where can I buy a bra like the one you're wearing?" It seriously made my day.

Sadly you can't get a bra like this in stores anymore but I've had something in the works for a while now to make sewing your own easier and a bit more fun.
I've been working for months now to grade this pattern into many more sizes and have also partnered with Take & Make to offer a complete bra sewing kit with everything you need (including the pattern download) to sew the bra pictured below.

The bra sewing kit for pattern #2013.

The kit includes ready made straps and plush hook and eye closures that have been carefully matched with soft white satin, thread, and enough fine, soft muslin to sew a test version, with enough left over to line the bra if you should so choose. You can find the complete kit here.

We decided to go with white satin for the kits so that finding matching underwear wouldn't be a chore.

In one of my most recent posts we looked at an original 1940's bra to study the sewing details used. I'll be including these kinds of details in our sew-along posts and hopefully we'll all get to learn something new.

Top-stitch details are almost a must for any vintage bra!

And of course, this would be no sew-along launch without a giveaway! Next week I'll choose three winners from the comments on this post who will each get a digital copy of the bra pattern we'll be using.
To enter the giveaway here on A Few Threads Loose, simply leave a comment on this post letting me know you're in!

For an extra entry, you can do any or all of the following, just leave a comment letting me know about it!

• Like Mrs. Depew Vintage on Facebook.
• Follow A Few threads Loose on Bloglovin' or other blog reader sites.
• Pin any item on MrsDepew.com to Pinterest.
• Share this post on Facebook. 
• Share this post on your blog, if you have one.

I'll announce the winner of the giveaway on October 23rd and then we can start gathering our materials for the sew-along.


Happy sewing, and best of luck to the entrants!

A Vintage Brassiere in Profile... 1940's Bra by Siva of Paris

Hello lovely readers. Recently, I've been working on grading a few of my 1940's bra patterns into larger sizes. While doing this, I tested a few for fit and accuracy by sewing a few samples and became SO inspired to sew more lingerie again! In a fit of passion, I pulled all of my vintage brassieres out to study their construction and was again delighted to see the interesting details that these little beauties featured.

If you ever decide to try your had at some historically accurate bra sewing, here a few details you might like to try!

This little bra by Siva of Paris is from the late 1930's to early 1940's. The fabric is a satin coutil, a wonderful, but very hard-to-find piece of fabric for lingerie sewing. If you can't find coutil, a great substitute is to buy a very lightweight satin and baste it to a soft cotton lawn or fine muslin. This has worked wonders for some of my bra sewing projects.

The closure is one of my favorite types, and adjustable length of elastic (with mini buttonholes!) with a hook. These are incredibly comfortable and are still my favorite way to finish the back of a bra.