Bias tape: binding an inverted corner.

 For the Ooh La La Pin-Up Sew-Along we just finished binding our top and bottom corset edges. If you want to know how to get a sharp point (as opposed to a softer, rounded look) on the inverted corner in the center panel, here's a good technique to try.

My practice corner, an exact copy of the inverted corner in the corset center panel.

This will involve sewing a pre-made corner into your binding so measure out the binding you need for the bottom first (then add two 'in case of error inches" to that.)
I suggest making a practice piece first like I have here to test out and get comfortable with the idea. 

Ooh la la Pin Up Sew-Along... Binding your edges.

The pattern we're using...

Today for binding your edges, Sarah put together an excellent post for us. Her explanations are so nicely put together that there's not much for me to add! Her method is a really great way to control the quality of the binding that goes on. There are so many ways to bias bind an edge that we really don't want to overwhelm you with too much info here. I prefer to sew mine on completely by hand because crazy, unnecessary hand work soothes the neurotic person in me. You really don't have to do it that way.

~Sarah~

Before you get started, make sure you have inserted all of the bones you plan on using, and have tested the fit.

For your binding, you can use purchased bias trim or bias trim made of self or contrasting fabric.  I'm using the same pink satin as I used to cover my bone casings.  I am cutting bias strips 1 1/8" wide, and pressing my folds prior to stitching.

Baste your bias tape in place, leaving a little overhang on each end as pictured above.

Ooh la la Pin Up Sew-Along... Embelishments: Hooks and eyes can be pretty too.

When I last posted about the corset we had just finished sewing our hook and eye tape to the corset back. Now, here's how to make it pretty.

I chose to bind the outside edges of my closure with cream satin bias tape. This was too small a place to get a sewing machine needle into, especially with the hooks and eyes in the way, but that's ok. I really prefer to sew bias binding on by hand. I feel like I have better control over where my stitches go and how they look on both sides.

When we first moved to Norway, I made a newbie mistake and plugged my sewing machine into the wrong end of my electric transformer, blowing the electric part out. Gertie of Gertie's Blog for Better Sewing and her great readers helped me out in this post by suggesting all sorts of hand sewing projects I could do to stay busy until my machine was fixed.
I ended up sewing several projects completely by hand including an amazing silk blouse and now I consider hand stitching to be an incredibly soothing and rewarding pastime.

If you choose to bind our edge as I have done, make sure that you keep your stitches under the eyes, and that the stitches directly under the eye are split in two, just in case the hook catches, it will be anchored well there.

I bound both edges like this and then it was time to add boning again. I agree with Sarah completely when she said that if you add boning anywhere to the corset, you really need to add it to the back.

It depends on what type of hook and eye tape you have but sometimes there's a channel already hidden behind the hooks and eyes that's perfect for boning to slip into. If there isn't such a spot in your case, then don't worry! There should still be a gap between the back of the hook and eye tape against the corset fabric.

Here's my bound and boned hook edge from the outside.

For a little added embellishment I added a length of purchased ruffle trim to the back of my hook side. I just carefully slip-stitched it in place. The top and bottom ends will be nicely bound when we finish the rest of the corset binding.

Next up comes binding the top and bottom. If you've done any quilting, I'm sure your bias binding techniques will come in handy in this part!
With any luck, my garter clips will get here soon and I can finish this little beauty.

How is everyone doing so far? Are you behind or ahead of Sarah and I?
Keep in mind that there's no deadline, no homework due, and you don't have to keep the same pace as anyone else. This is to make sewing lingerie easy and fun for you, on YOUR terms!

Ohh La La Pin Up Sew Along... Your Hook and Eye Closure

The pattern we're using...

All right Ladies, it's that time. Hook and eye time. First, allow me to disclaim a bit. This is not my very best work. I did this on day 4 of NO sleep (hurray for medicine side effects) so my pictures and sewing both are a wee bit blurry, I apologize.

This is a bit of a long post so feel free to stop half way though and have a glass of wine. I did.

The right hand side of the tape will be our 'raw' edge.

 Start by cutting the length of hook and eye tape you need for your back closure. I recommend doing this with the hooks and eyes locked together to avoid any mismatched edges.
Decide which side you want the hooks and eyes on. I went with the standard bra formula of Hooks on the Right, Eyes on the Left.

Let's start with they eyes, shall we?

Ohh La La Pin Up Sew Along... Adding your boning.

The pattern we're using...

In our last post we went over sewing a French seam to encase our corset boning.

Today we have a close up view of how the boning will fit snugly inside the channel created by the French seam. The above looks pretty narrow to fit 1/4" boning in, and it is but it will fit if you've measured your seam allowances right while sewing.

I'm using 1/4" wide, vintage 1940's Featherbone to stiffen my seams. If you want to refer back to the types of boning, Sarah gave us a really great overview in this post.

I have chosen to bone only the first side front channels marked for boning in the pattern. I'll be using the rest of my boning to stiffen my hook and eye closure at the back, which we'll talk more about in a later post.

Make sure you round the edges of your boning at the top and bottom. This keeps rough corners from wearing through your fabric and eventually poking the daylights out of you. Edges too rough for scissors? Try filing it smooth with a nail file.

Ohh La La Pin Up Sew Along... Sewing your French seams.

The pattern we're using...

Today for the sew-along we'll sew all our side seams together. Unlike the regular seams we used to cobble our muslins together, we'll be using French seams, stitched flat to encase our boning.
But first, since this pattern has seam numbers instead of notches, how will you tell your pattern pieces apart? You can always mark with chalk or fading fabric pen but I prefer to make a key.

I'm not sure why I went up to five instead of four here, must've been the wine.

To tell my many pattern pieces apart since I used pattern weights instead of pins when cutting, I like to color code my seams with pins.

So for example, blue is seam #3, green is seam #4, and instead of matching notches, I match up the pins.

Now for our French seams. Remember, Wrong sides together, then Right. Sarah and I have both added a 5/8" seam allowance to our pattern pieces.